Thuis /
T-Top

T-Top

Fishmaster T-Top Radome Mounting Plate w/Mouning Bracket
- 30cm x 30cm anodized aluminum plate for mounting your radar
- Mounts easily to the Fishmaster t-top frame or any 1.9" or 2" tubing
- Stainless hardware included
- Super strong 1/4" aluminum stamped plate with clamshell clamp
Meer Informatie
€ 229,90
Fishmaster T-Top Original Vertical Brace Standoffs
- Only needed for heavily accessorized T-Tops (over 50kg ) used regularly in very rough water.
- Installation can be done in a few hours.
- Includes quick release knobs for quick and easy removal for folding down the T-Top.
- Can be mounted to the side, front, or top of the console.
- We recommend you use anti seize material while assembling.
- Significantly increases frame stiffness, but rarely needed. Beneficial for use on consoles less than 30" tall. Works well with inflatables.
Meer Informatie
€ 199,90
Fishmaster Deck Mounted Grab Bar
- Many accessories can be attached to the 1.66" tubing
- Measures 36.5 inches from deck to top of grab bar
- Polished and anodized to prevent corrosion
- All hardware and instructions are included
- Can be installed and removed from the boat simply and quickly for easy storage
- Stainless Steel Hardware
Meer Informatie
€ 199,90
Fishmaster T-Top Pro Series Vertical Brace Standoffs
- Only needed for heavily accessorized T-Tops (over 50kg ) used regularly in very rough water.
- Installation can be done in a few hours.
- Includes quick release knobs for quick and easy removal for folding down the T-Top.
- Can be mounted to the side, front, or top of the console.
- We recommend you use anti seize material while assembling.
- Significantly increases frame stiffness, but rarely needed. Beneficial for use on consoles less than 30" tall. Works well with inflatables.
Meer Informatie
€ 199,90
Fishmaster T-Top Original Stabilizer Bar
- Adds additional stability to your t-top
- Adjustable to work at widths from 24" to 50"
- Works exclusively with 1.9" diameter t-top legs
- Install high or low, front legs or rear legs
- Works as a grab handle
- Polished and Anodized tubing
- Stainless Steel Fasteners
Meer Informatie
€ 149,90
Fishmaster T-Top Radome Mounting Plate (Plate Only)
- 30cm x 30cm anodized aluminum plate for mounting your radar
- Stainless hardware included
- Super strong 1/4" aluminum stamped plate with clamshell clamp
Meer Informatie
€ 149,90
Fishmaster T-Top Pro Series Standoffs - Set of 2
- Simple DIY installation.
- Universal design makes theses compatible with any brand of center console t-tops.
- Normally only needed for consoles under 30" tall.
- We recommend you use anti-seize material to avoid future problems on bolts and nuts.
- 304 stainless steel rods with plastic acetyl inserts for spacing. Multiple spacers are included with each product to achieve the custom fit.
Meer Informatie
€ 94,49
Fishmaster T-Top Original Standoffs - Set of 2
- Simple DIY installation.
- Universal design makes theses compatible with any brand of center console t-tops.
- Normally only needed for consoles under 30" tall.
- We recommend you use anti-seize material to avoid future problems on bolts and nuts.
- 304 stainless steel rods with plastic acetyl inserts for spacing. Multiple spacers are included with each product to achieve the custom fit.
Meer Informatie
€ 94,49
Fishmaster T-Top Universal Folding Antenna Mounting Plate
- Swivels to be used on front, rear, or sides of the t-top.
- Works well with ratchet mount antennas brackets for GPS or FM/VHS existing antenna.
- Stamped from marine grade polished and anodized aluminum with stainless hardware that attaches antenna bracket to the plate.
- Holes are pre-drilled for exact mounting location. Its footprint is 3" by 1-1/2" on center and compatible with most folding antenna mount brackets.
- We recommend you use anti-seize when assembling threaded nuts in the marine environment.
Meer Informatie
€ 59,90
Fishmaster T-Top Folding Antenna Mounting Plate
- Swivels to be used on front, rear, or sides of the t-top.
- Works well with ratchet mount antennas brackets for GPS or FM/VHS existing antenna.
- Stamped from marine grade polished and anodized aluminum with stainless hardware that attaches antenna bracket to the plate.
- Holes are pre-drilled for exact mounting location. Its footprint is 3" by 1-1/2" on center and compatible with most folding antenna mount brackets.
- We recommend you use anti-seize when assembling threaded nuts in the marine environment.
Meer Informatie
€ 59,90

ABOUT FISHMASTER

Fishmaster was created to provide innovative and affordable products to fellow fishing addicts. It began in the Spring of 2005 as a team of seasoned engineers who had designed the most popular wakeboard tower set out to build the first universal t-top that could fold for fixed bridges and storage. This quickly grew to a team including other engineers, professional fishermen and boat dealers providing input from every perspective - installation, ownership, design, structural analysis and manufacturing. The team had one common goal - create a great T-Top and make it affordable.

We then set our sights on providing a complete line of accessories for the Fishmaster T-Top including swivel rod holders, innovative soft goods storage products and many others. We are currently working on many new products and accessories for fishing boats that each have innovative functionality and are affordable.

Our goal is to have 100% customer satisfaction. It is not acceptable to us if any customer that owns our products are not completely satisfied. If you own a Fishmaster product and are not 100% happy please contact us, our job is not done yet!

We thank you for your interest in Fishmaster and look forward to the opportunity to provide you outstanding service and support.